This is an example of us using our Vactor truck to clean sand out of agricultural lines in an almond orchard in the central valley. These lines were completely choked down with sand to the point that they were no longer usable. We blasted the sand out with our high pressure jet vac. as the sandy water was being expelled from the pipe we utilized the vacuum on the truck to suck the sandy water up and we dumped it out at another location. We were able to successfully restore this irrigation line to working order.
Here is an example of our Vactor truck cleaning the sewer line in the street. The high pressure hose is self propelled by the specialized bullet shaped jetter head which produces a cone of water. The metal jetter head is propelled down the line much like a rocket. When the hose is pulled back the cone of water pulls all debris in the line with it. The loosened debris can then be flushed further down the line or captured and removed completely by the powerful vacuum hose depicted in this picture over the top of the truck cab. (*The vacuum is not in use in this photo but can be used simultaneously with the jetter hose.)
Here is an example of an large scale residential engineered septic system with deep leech lines to provide adequate drainage for this area with a lot of hard pan. What you see in this picture are the long trenches called leech lines which are filled with 1 1/2 inch river rock surrounding a horizontal perforated pipe. This allows water to flow from the septic tank and into these trenches. The water then peculates through the rock and back into the ground. This job was done in Fresno CA.
This is our powerful Vactor vacuum truck removing sand from a metal container for a water well drilling company. We used this truck to clean out this entire 40ft long metal bin so that they could continue the well drilling operation. Our Vactor truck has excellent reach and we are bale to control it by remote.